Canon imageCLASS MF7470 - Manual (Page 109)

1
2
3
4
5
6
7
8
9
10
11
3-38
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Canceling Copy Jobs
You can cancel a job using the touch panel display or System
Monitor screen, or by pressing (Stop).
Using the Touch Panel Display
You can cancel a copy job by pressing [Cancel], while the job is
being copy.
1.
Press [Cancel] on the pop-up screen that
appears while the machine is scanning, printing,
or waiting to print.
If you cancel a copy job during scanning, make sure to remove the
original for that job.
Using the System Monitor Screen
You can cancel a copy job while it is waiting to be processed or
during printing.
1.
Press [System Monitor].
2. Press [Copy].
3. Press [Status].
■
■
4. Select the copy job that you want to cancel, then
press [Cancel].
If the job that you want to cancel is not displayed, press [ ▼] or
[ ▲] to scroll to the desired job.
You cannot select multiple jobs and cancel them all at once. You
may only select and cancel one job at a time.
5. Press [Yes].
The message <Canceling...> appears for approximately two seconds
on the touch panel display.
The canceled job is displayed as <NG> (No Good) on the Log screen.
6. Press [Done].
–
–