Changing the color mode (imageclass mf7480 only) – Canon imageCLASS MF7470 User Manual

Page 125

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

4-14

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Changing the Color Mode (imageCLASS
MF7480 Only)

The following two color modes are available: Color and B&W (black
and white).

Color

The Color mode always scans in color regardless of whether the
original is in color or black-and-white.

B&W

The B&W mode always scans in black-and-white regardless of
whether the original is in color or black-and-white.

If the destination is a fax number or I-fax address, the original is always
scanned and sent in B&W mode.
If you select the Color mode and select JPEG as the file format, you can
select 100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, or 300 x 300 dpi as the
resolution.
If you select the Color mode and select PDF (Compact) as the file format,
300 x 300 dpi is available as the resolution.
If a black-and-white original is scanned in the Color mode, it is counted
as a color scan.
If you select the B&W mode, you can select TIFF or PDF as the file format,
and 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi, 300 x 300
dpi, 400 x 400 dpi, or 600 x 600 dpi as the resolution.

1.

Press (SEND).

2.

Place your originals.

3.

Specify the destination.

4.

Press [Scan Settings].

5.

Press

[Option].

6.

Press [Color] or [B&W], then press [OK].

If [TIFF] or [PDF] is selected as the file format, and you select
[Color] as the color mode, and then press [OK], a message asking
for your confirmation to change the file format appears on the
screen.
If [JPEG] or [PDF(Compact)] is selected as the file format, and you
select [Color] as the color mode, and then press [OK], a message
asking for your confirmation to change the file format appears
on the screen.

7.

Press (Start).

If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press (Start) once for
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.

To cancel the scan settings, press [Scan Settings], then [Option],
then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).

Advertising
This manual is related to the following products: