Canon imageCLASS MF7470 - Manual (Page 128)

1
2
3
4
5
6
7
8
9
10
11
4-17
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
7. Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press (Start) once for
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
To cancel the scan settings, press [Scan Settings], then [Option],
then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).
Automatic Density Adjustment
The machine automatically adjusts the scan density to the level
best suited to the quality of the original.
If you select the Color mode, automatic density adjustment cannot be
used.
If you set the automatic density adjustment, the original type setting is
disabled.
1.
Press (SEND).
2. Place your originals.
3. Specify the destination.
4. Press [Scan Settings].
5.
Press [Option].
–
–
–
–
6. Press [A], then press [OK].
The machine automatically adjusts the scan density to the level best
suited to the quality of the original.
An automatic scan density adjustment may not work with
transparencies. In this case, adjust the scan density manually by
pressing [Light] or [Dark].
7. Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press (Start) once for
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
To cancel the scan settings, press [Scan Settings], then [Option],
then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset). –
–