Fax dialing features, Switching temporarily to tone dialing, Fax dialing features -42 – Canon imageCLASS MF7470 User Manual

Page 153: Switching temporarily to tone dialing -42

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

4-42

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Fax Dialing Features

Switching Temporarily to Tone Dialing

If your machine is set for pulse dialing, use the procedure below to
switch to tone dialing to use information services (e.g., banks, airline
reservations, and hotel reservations).

When you use the fax information services, you cannot use the Recall
mode.

1.

Press (SEND).

2.

Press [New Address].

3.

Press

[Fax].

4.

Press

[Hook].

5.

Enter the number of the fax information service

using – (numeric keys).

If you press [One-touch Buttons]:

Select the desired one-touch button, then press [Done].
One-touch buttons are assigned a three digit number. To specify
a destination using a one-touch button’s three digit number,
enter the three digit number using

(numeric keys).

6.

When your call is answered and you hear the

recorded message of the information service,
press [Tone].

If you are already using this machine with tone dialing, this step is
not necessary.
After you press [Tone], a <T> appears on the touch panel display.

7.

Enter the numbers requested by the information

service using – (numeric keys), , and .

If you require more information about the service, contact the
company providing the service.

Advertising
This manual is related to the following products: