Canon imageCLASS MF7470 - Manual (Page 163)

1
2
3
4
5
6
7
8
9
10
11
4-52
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
5. Enter the recipient’s fax number (up to 120
characters) using – (numeric keys), , and
.
[Pause]: Press to insert a pause of several seconds in the fax number
you are dialing. If you insert a pause within the fax number, the letter
<p> is displayed between the numbers. If you insert a pause at the
end of the fax number, the letter <P> appears. When dialing an
overseas number, insert a pause after the country code, and at the
end of the fax number. (See “Pause Time,” on p. 11-14.)
[Tone]: Press when you want to directly call an extension line that is
connected to a PBX (Private Branch Exchange), which accepts only
tone signals. If you press [Tone], the letter <T> appears.
[
◀] [▶]: Press to move the position of the cursor.
[Backspace]: Press to delete the number or character immediately to
the left of the cursor.
[Space]: Press to insert a space between numbers.
[Option]: Press to specify the sending speed, type of call, and ECM
TX settings. These settings are optional.
You cannot insert a pause or a space at the beginning of a
number.
If you enter a pause at the end of the number, the pause is always
10 seconds long.
You can press
(Clear) to clear your entry.
6.
Press [Option].
7. Press [Sending Speed].
–
–
–
8. Select the desired sending speed, then press
[OK].
If your document transmissions are slow in starting, this may mean
that the telephone lines in your area are in poor condition. Select a
slower speed. You can select [33600 bps], [14400 bps], [9600 bps], or
[4800 bps].
9. Press [Long Distance].
10. Select the type of call, then press [OK].
Select [Domestic] for dialing domestic (local) telephone numbers.
Select [Long Distance (1)] if communication errors frequently occur
when you make overseas calls (when the overseas telephone
number is registered in the Address Book). If errors persist, try
selecting [Long Distance (2)] or [Long Distance (3)].
11. Press [ECM TX].
12. Select [On] or [Off], then press [OK].
13.
When all settings are complete, press [OK].
14. Press [Next].