Canon imageCLASS MF7470 - Manual (Page 173)

1
2
3
4
5
6
7
8
9
10
11
4-62
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Receiving Documents
The following shows how the machine operates when it
receives a fax or I-fax document.
1. When documents are being received, the
Processing/Data indicator on the control panel
flashes a green light.
2.
When document reception is complete, the
Processing/Data indicator on the control panel
maintains a steady green light. This indicates
that documents are stored in memory.
The Processing/Data indicator flashes or maintains a steady
green light even when the machine enters the Sleep mode.
The Error indicator flashes a red light when either the amount
of available memory is low or paper needs to be loaded into a
paper drawer.
3. The document is printed.
The Processing/Data indicator goes out when documents stored in
memory are printed.
If there is no paper on which the received document can be
printed, the received document is stored in memory.
Documents which have been stored in memory because the
paper has run out, are automatically printed when paper is
loaded into a paper drawer.
If a printing error occurs, the Error indicator flashes a red light.
–
–
–
–
–