Canon imageCLASS MF7470 - Manual (Page 192)

1
2
3
4
5
6
7
8
9
10
11
4-81
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Checking/Changing the Status of Receive
and Forwarding Error Jobs (imageCLASS
MF7480 Only)
You can check the contents of received documents stored in
memory as well as the status of receive jobs.
If Job Log Display in System Settings is set to [Off ], [RX Job Report] is not
displayed on the System Monitor screen.
Up to 128 documents for the total of send and receive jobs combined
can be displayed on the job log (Activity Report (RX)) screen.
Checking Receive Job Details
You can check the detailed information of any received job, such as
the destination and the date and time the job was received.
1.
Press [System Monitor] → [RX/TX] → [RX Job
Report].
2. Select the job whose detailed information you
want to check, then press [Details].
If the job that you want to select is not displayed, press [ ▼] or [▲] to
scroll to the desired job.
3. Check the details.
4.
Press [Done] repeatedly until the Send Basic
Features screen appears.
■
–
–
Printing the Receive Job Log (Activity Report)
You can print the receive job log (Activity Report (RX)).
1.
Press [System Monitor] → [RX/TX] → [RX Job
Report].
2. Press [Print List].
The Receive Job Log can be printed only if 11" x 17", LGL, LTR, or LTRR
paper (plain or recycled paper) is loaded in the paper sources whose
settings in Other in Drawer Eligibility For APS/ADS in Common
Settings (from the Additional Functions screen) are set to [On]. (See
“Automatic Paper Selection/Automatic Drawer Switching,” on
p. 2-21.)
3. Press [Yes].
To cancel printing, press [No].
The Activity Report (RX) is printed.
4.
Press [Done].
Checking the Arrival of I-Fax Jobs
The machine regularly checks for the arrival of an I-fax. However,
you can check for the arrival of an I-fax at any time by performing
the procedure below.
1.
Press [System Monitor] → [RX/TX] → [RX Job
Report].
–
–