Canon imageCLASS MF7470 - Manual (Page 226)

1
2
3
4
5
6
7
8
9
10
11
6-25
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
If [User-level access control] is selected:
Right-click the folder you want to share using Explorer → click
[Sharing].
On the [Sharing] sheet, click [Shared As] → enter the share name
in [Share Name].
Click [Add] to open the [Add Users] dialog box on the screen.
From the left list select the users to whom you want to give
access to the shared folder → add them to the right list.
For details on this dialog box, see the Windows 98/Me
documentation.
Confirm the settings you entered → click [OK].
Click [OK] to close the properties dialog box of the shared folder.
●
–
–
–
–
–
–
3. Set a destination address using the machine’s
control panel.
Sample destination setting:
Server side settings:
[Computer name]: swan
[Share Name]: share
Create a folder called Images within share, then specify Images as
the destination for sending.
The machine’s destination settings:
The Protocol drop-down list: Windows (SMB)
[Host Name]: \\swan\share (Double backslash “\\” can be omitted)
[File Path]: \Images
[User]: User selected in step 2. (Not required if you have selected
[Share-level access control] in step 1)
[Password]: Password entered in step 2.
If you use [Browse] to specify each item, press [Browse] after the
expiration of the time specified in “Startup Time Settings,” on
p. 6-45 (the default setting startup time is [60] (seconds)).
A maximum of 120 alphanumeric characters can be entered for
[Host Name]. Also, a maximum of 120 alphanumeric characters
can be entered for [File Path]. Enter each of these items on the
server using no more than their allowable number of characters.
If Language Switch in Common Settings is set to [On], the Host
Name and File Path of the file server destination may not be
displayed correctly, so you may not be able to refer to them.
If the language of the touch panel display differs from the
computer used as a master browser, [Host Name] and [File Path]
may not be displayed correctly, or you may not be able to browse
the directories.
You can send data using the following formats. A DNS server is
required for the latter case:
\\192.168.2.100\share
\\host_name.organization.company.com\share
For instructions on how to specify destination address settings,
see “Specifying Destinations,” on p. 4-21.
●
–
–
–
–
–
–
–
–