Canon imageCLASS MF7470 - Manual (Page 234)

1
2
3
4
5
6
7
8
9
10
11
6-33
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Additional Network Settings
Depending your network environment, additional network
settings may be required.
It is recommended that the network administrator perform the following
procedures.
TCP/IP Settings (IPv4)
DNS Settings
DNS (Domain Name Service) is a service used for associating a host
name (which is a name of a computer or a printer on a TCP/IPv4
network) with a unique IPv4 address.
1. Press (Additional Functions).
2. Press [System Settings] → [Network Settings] →
[TCP/IP Settings] → [IPv4 Settings] → [ ▼] →
[DNS Server].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The DNS Server screen appears.
3. Press [DNS Server Address Settings].
4. Press [Primary DNS Server].
5. Specify the IPv4 address of a DNS server using
– (numeric keys).
6. Press [Secondary DNS Server].
■
7.
Specify the IPv4 address of a DNS server using
– (numeric keys).
If you do not want to set up a DNS secondary server, enter <0.0.0.0>.
If [BOOTP] or [DHCP] is set to [On], the IP address of a DNS server you
set manually will be overwritten.
8.
Press [OK].
9. Press [DNS Host Name/Domain Name Settings].
10. Press [Host Name].
11. Enter the name of the machine, then press [OK].
12. Press [Domain Name].