Tcp/ip settings (ipv6), Tcp/ip settings (ipv6) -40 – Canon imageCLASS MF7470 User Manual

Page 241

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

6-40

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

6.

Press [Port Number].

7.

Enter the port number of a proxy server using

the – (numeric keys).

8.

Select [On] or [Off] for <Use Proxy within the

Same Domain>.

9.

Press [Authentication Settings].

10.

Select [On] or [Off] for <Use Proxy

Authentication>.

[Off ]: Disables the use of proxy authentication. Skip to step 15.
[On]: Enables the use of proxy authentication. Proceed to step 11.

11.

Press [User].

12.

Enter the user name to use for proxy

authentication, then press [OK].

13.

Press [Password].

14.

Enter the password to use for proxy

authentication, then press [OK].

15.

Press [OK].

16.

Press [OK].

17.

Press [Done] repeatedly until the Additional

Functions screen closes.

18.

Restart the machine.

Turn off the machine, wait at least 10 seconds, then turn it on.

TCP/IP Settings (IPv6)

You cannot use the functions of IPv6 without using the functions of IPv4.

IP Address Settings

The machine can use up to seven of the following IPv6 addresses.
With IPv6 communication, multiple IPv6 addresses can be used at
the same time.

Link local address (1)

An address that is only valid within the same link. A link local
address is automatically set using a specific prefix (fe80::) and an
interface identifier generated from the MAC address of the
machine. When the machine is using the functions of IPv6, one link
local address is always registered.

Manual address (0 or 1)

A fixed address that is set from the control panel.

Stateless address (0 to 6)

A stateless address is automatically set using the machine’s MAC
address and the prefix (information indicating the network
belonged to) included in the RA (Router Advertisement) notified by
the router when the machine is started.

Stateful address (0 or 1)

A stateful address can be obtained from a DHCP server using
DHCPv6.

Advertising
This manual is related to the following products: