Canon imageCLASS MF7470 - Manual (Page 244)

1
2
3
4
5
6
7
8
9
10
11
6-43
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
14. Enter the network domain name of the machine,
then press [OK].
If you set Use DHCPv6 to [On], the IPv6 address of a DNS server you
set manually will be overwritten.
15.
Press [OK].
16. Press [DNS Dynamic Update Settings].
17. Select [On] or [Off] for <DNS Dynamic Update
Settings>.
[Off ]: Does not use the DNS server dynamic update function. Skip to
step 20.
[On]: Enables you to automatically register the IPv6 address, host
name, and domain name set for the machine in the DNS server using
dynamic DNS updating if your environment includes a dynamic DNS
server. Proceed to step 18.
18. Select [On] or [Off] for <Register Manual
Address>.
[On]: Registers a manual address in the DNS server using dynamic
DNS updating.
[Off ]: Does not register a manual address in the DNS server using
dynamic DNS updating.
19. Select [On] or [Off] for <Register Stateful
Address>.
[On]: Registers a stateful address in the DNS server using dynamic
DNS updating.
[Off ]: Does not register a stateful address in the DNS server using
dynamic DNS updating.
Windows 2000 Server and Windows Server 2003 do not support
DHCPv6 servers.
20. Press [OK].
21. Press [Done] repeatedly until the Additional
Functions screen closes.
22.
Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.