Canon imageCLASS MF7470 - Manual (Page 304)

1
2
3
4
5
6
7
8
9
10
11
8-22
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Auto Online/Offline
(imageCLASS MF7480/MF7470 Only)
To use the Network Scan function, the machine must be
connected to a network, and must be separately switched
online to the network. This section explains how to switch the
machine online and offline to use the Network Scan function.
Auto Online
If Auto Online is set to [On], the machine automatically goes online
when you press
SCAN
(SCAN).
1. Press (Additional Functions).
2. Press [System Settings] → [ ▼ ] → [Auto Online/
Offline] → [Auto Online].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Auto Online screen appears.
3. Select [On] or [Off], then press [OK].
4. Press [Done] repeatedly until the Basic Features
screen appears.
■
Auto Offline
If the machine is connected to a network that is online, scanning is
not possible with the Copy function. By setting Auto Offline to [On],
the machine automatically goes offline when the Auto Clear mode
initiates.
1. Press (Additional Functions).
2.
Press [System Settings] → [ ▼ ] → [Auto Online/
Offline] → [Auto Offline].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Auto Offline screen appears.
3. Select [On] or [Off], then press [OK].
4.
Press [Done] repeatedly until the Basic Features
screen appears.
If Auto Offline is set to [On], the machine automatically goes offline
once the Auto Clear mode initiates. If the Auto Clear mode is not set
(the Auto Clear Time is set to <0>), the machine automatically goes
offline after approximately two minutes. (See “Setting Auto Clear
Time,” on p. 1-18.)
■