Canon imageCLASS MF7470 - Manual (Page 373)

1
2
3
4
5
6
7
8
9
10
11
10-43
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
For Windows 98/Me:
1. Click [Start] on the Windows task bar → [Settings] →
[Printers] → double-click the icon of the printer you
installed.
2. Delete the print job.
For deleting all the print jobs:
Click [Printer] → [Purge Print Documents].
For the specified job:
Right-click the print job you want to delete →
[Cancel Printing].
Indicators off and display blank.
Is the main power switch turned on?
Check the main power switch to ensure that the
machine is turned on.
Is the power cord plugged in securely?
Check the power cord and be sure it is connected at
both ends.
Is the power cord supplying power?
Check the AC outlet. Consult an electrician or the local
power company. If you are using a power strip, ensure
that the power lead is connected at the source and
turned on.
–
–
–
–
Q
A
Q
A
Q
A
Printing does not start.
Is the output tray full of paper during the print
job?
Remove the paper in the tray.
Does the machine properly connect to the host
computer?
Check the cable connection between the host
computer and machine. (See “Connect the Machine to
a Network,” in the Starter Guide.)
Does any message appear on the touch panel
display?
Take appropriate measures according to the message.
Does the paper size set in the drawer match the
paper size you have set in the application
software?
Change the paper in the selected drawer to the paper
size you have set in the application software (or to the
size you have set for enlarging/reducing copy). Then
print it again.
Select the drawer with the appropriate paper size you
have set up in the application software (or to the size
you have set for enlarging/reducing copy). Then print
it again.
Q
A
Q
A
Q
A
Q
A
A