Canon imageCLASS MF7470 - Manual (Page 395)

1
2
3
4
5
6
7
8
9
10
11
11-12
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Communications Settings
Gamma Value for Color Send Jobs* 1 Sets the gamma value for color scanned data. If the set value corresponds to the gamma value
at the recipient’s machine, the scan exposure of the output data at the recipient’s machine is
automatically adjusted to the level best suited to the quality of the original. (Gamma 1.8,
Gamma 2.2, Gamma 1.0, Gamma 1.4)
Sharpness Sets the contrast of the images you scan. (1-7)
Register Favorites Button Stores destinations with it send settings in favorites buttons.
Color TX Scan Settings* 1 Sets the priority for color scanned data. Selecting Speed Priority reduces the time spent in
sending the document, but results in low quality images. Conversely, selecting Image Priority
increases the time spent in sending the document, but results in high quality images.
Speed Priority
Image Priority –
–
Default Screen for Send Sets whether the [Favorites], [One-touch] tab, or the Send Basic Features screen is displayed
when the power is turned on, (Reset) is pressed, or the Auto Clear mode is activated.
Favorites Buttons
One-touch Buttons
Initial Function –
–
–
Initialize TX Settings Restores the TX Settings to their default settings. However, Retry Times, Unit Name, and TX
Terminal ID settings are not initialized.
RX Settings Sets the reception features.
2-Sided Print Sets whether the machine prints received documents on both sides of the paper. (See “Two-
Sided Printing,” on p. 4-71.)
Off
On –
–
* 1 Indicates the item that appear only for the imageCLASS MF7480.