Canon imageCLASS MF7470 - Manual (Page 397)

1
2
3
4
5
6
7
8
9
10
11
11-14
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Communications Settings
Continue Printing When Toner Is Out Sets whether the machine continues printing received documents and reports when it is
running out of toner. If you set the machine not to continue printing, the machine stops printing
when the toner starts to run out, and automatically stores the received documents in memory.
Off
On –
–
Fax Settings Sets the fax features.
User Settings Specifies the basic operation settings in the fax mode.
Unit Telephone # Registers your fax number (max. 20 characters, including spaces). (See “Set the Machine for
Sending Documents,” in the Starter Guide.)
Tel Line Type Selects the telephone line type. (See “Set the Machine for Sending Documents,” in the Starter
Guide.)
Pulse
Tone –
–
Monitor Volume Control Sets the volume for the monitor tone that this machine sounds during a fax transmission.
TX Settings Sets the transmission features.
ECM TX Sets whether the ECM (Error Correction Mode) transmission is activated.
On
Off –
–
Pause Time Sets the pause time when you insert pause into the dialing sequence. (1sec−15sec)
Auto Redial Sets whether to redial automatically when the other line is busy or a transmission error occurs.
(See “Setting Automatic Redialing (Fax) ,” on p. 4-39.)
Redial Times Sets the number of retries. (1 times−10 times)
Redial Interval Sets period of time before redialing. (2 min.−99 min.)
Transmission Error Redial Sets whether the machine redials automatically when transmission error occurs.
On
Off –
–