Canon imageCLASS MF7470 - Manual (Page 401)

1
2
3
4
5
6
7
8
9
10
11
11-18
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Adjustment/Cleaning
Special Mode S Sets whether to reduce the waiting time for a next job. If size of paper required is different for a
job that follows an extended amount of printing, there may be a waiting time before the next
job starts.
* If you set this mode to [Speed Priority 1] or [Speed Priority 2], a previously printed image may
reappear faintly on the next printout.
Off Does not reduce the waiting time.
Speed Priority 1 Reduces the waiting time. Printing resumes quickly.
Speed Priority 2 Reduces the waiting time to a lesser degree.
Rotate Collate Adjustment Adjusts the wait time when printing with the Rotate Collate mode. Printing with this mode
involves two different paper sources, and a certain wait time is required to switch them.
Speed Priority 2 Medium wait time.
Image Priority Longest wait time.
Speed Priority 1 Shortest wait time.
Auto Adjustment for Dirty Feeder Sets whether to prevent dirt and grime in the feeder from appearing on your prints and copies.
If the feeder is dirty, dots or lines may appear on prints or copies.
- Off
- On
- If either [JPEG] or [PDF (Compact)] is selected for [File Format] when the Send function is used,
the setting for this mode is not applied.
- While some dots or lines may continue to be printed even if this mode is set to [On], copies are
significantly clearer than when this mode is set to [Off ].
Maintenance Code This setting is not functional in this model.