Canon imageCLASS MF7470 - Manual (Page 48)

1
2
3
4
5
6
7
8
9
10
11
1-20
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Checking Device Status
You can check the current machine status both on the Job/Print
Status Display Area and on the Device status screen.
The Job/Print Status Display Area (A) displays the progress of
jobs and copy operations, and the status of your machine and
consumables. Also, the current Department ID or user name can
be displayed here. (See “Displaying Department ID/User Name,”
on p. 8-21.)
For the Device status screen, press [System Monitor] (B) to
display the System Monitor screen, then press [Device]. The
Device status screen enables you to check the following
information:
A Displays the status of the device and the current job.
B Displays recovery procedures for problems, such as clearing
a paper jam or replacing the cartridge.
C Displays the status of toner by pressing [Consumable].
D Displays the remaining amount of available system memory.
E Displays the paper supply, paper type, and paper size loaded
in the paper drawers or the stack bypass.
The jobs may not be accepted even if <Avail. Memory> has not reached
zero percent. In this case, print or delete jobs stored in the memory and try
again.