Canon imageCLASS MF7470 - Manual (Page 51)

1
2
3
4
5
6
7
8
9
10
11
2-3
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Original Requirements
Platen Glass Feeder
Type Plain paper
Thick originals
Photographs
Small originals (e.g.,
index cards)
Special types of paper
(e.g., tracing paper*
1 ,
transparencies* 1 , etc.)
Book (Height: max. 1"
(24 mm))
–
–
–
–
–
–
Plain paper (Multipage
originals or one page
originals)
Size Max. 8 1/2" x 11 5/8"
(Max. 216 x 297 mm) 11" x 17", LGL, LTR, STMT
Weight Max. 4.4 lb (2 kg) 16 to 28 lb bond
(52 to 105 g/m
2 )
Quantity 1 sheet LTR: 50 sheets
(22 lb bond (80 g/m
2 ))
LGL/11" x 17": 25 sheets
(22 lb bond (80 g/m
2 ))
STMT:50 sheets
(22 lb bond (80g/m
2 ))
* 1 When copying a transparent original such as tracing paper or transparencies,
use a piece of plain white paper to cover the original after placing it face-down
on the platen glass.
Do not place the original on the platen glass or into the
feeder until the glue, ink or correction fluid on the original is
completely dry.
Do not place the following types of originals into the feeder:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Originals with staples or paper clips attached
Paper printed with a thermal transfer printer
Originals with tears or large binding holes
Severely curled originals or originals with sharp folds
Transparencies and other highly transparent originals
●
●
–
–
–
–
–
–
–
–
–
–
–