Canon imageCLASS MF7470 - Manual (Page 55)

1
2
3
4
5
6
7
8
9
10
11
2-7
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
2. Place your original face down.
The surface of the original that you want to scan must be placed face
down.
Align the top edge of your original with the back edge of the platen
glass (by the arrow in the top left corner).
Place books and other bound originals on the platen glass in the
same way.
When you are enlarging an LTR or STMT original onto 11" x 17" or LGL
paper, place the original horizontally on the platen glass, and align it
with the LTRR or STMTR marks.
3. Gently close the feeder.
Close the feeder gently to avoid catching your hands, as this may
result in personal injury.
Do not press down hard on the feeder when using the platen
glass to make copies of thick books. Doing so may damage the
platen glass and result in personal injury. –
–