Canon XA10 - Manual (Page 42)

Recording Movies and Photos
42
Recording in AUTO Mode
When you use mode to shoot video and take photos, the camcorder will automatically adjust
various settings for you.
1 Set the mode switch to .
2 Turn on the camcorder.
To record video
Press g to begin recording.
• Press g again to pause the recording.
• The ACCESS indicator will flash from time to time while the
scene is being recorded.
• During recording, N will appear on the screen. Additionally,
the tally lamp will illuminate.
To take photos
Touch [PHOTO].
• A green icon (h) will appear momentarily on the screen and the ACCESS indicator will flash as the
photo is recorded.
• You can record photos simultaneously while recording a movie.
• You can also press j on the wireless controller.
When you have finished recording
1 Make sure that the ACCESS indicator is off.
2 Turn off the camcorder.
3 Close the LCD panel.
Operating modes:
[PHOTO]
COP
Y