Using headphones 81, Cop y, Using headphones – Canon XA10 User Manual

Page 81

Advertising
background image

Using Headphones

81

Using Headphones

Use headphones for playback or to check the audio level while recording. The headphones are
connected to the AV OUT/

X terminal, which is used for both the headphones and the audio/video

output. Before connecting the headphones, follow the procedure below to change the function of the
terminal from AV output to

X (headphones) output.

* Headphones can be used also in

mode but the function of the terminal cannot be changed in

this mode. Change the setting in advance in one of the other operating modes.

1 Open the [AV/Headphones] screen.

[FUNC.]

[MENU]

6

[AV/Headphones]

• Touching [FUNC.] is necessary only when performing the procedure in a recording mode.

2 Touch [Headphones] and then touch [f].

3 Connect the headphones to the AV OUT/

X terminal.

4 Back in the menu, touch [Volume].

5 Touch [c] or [d] to adjust the volume and then touch [a].

• You can also drag your finger along the [Headphones] bar.

• J will appear on the screen.

To adjust the volume during playback

In

mode, and in

mode during slideshow playback, adjust the headphones volume the

same way you adjust the speaker’s volume (

0 94).

IMPORTANT

• When using headphones, make sure to lower the volume to an appropriate level.

• Do not connect the headphones to the AV OUT/

X terminal if the J icon does not appear on the

screen. The noise output in such case may be harmful to your hearing.

NOTES

• Use commercially available headphones with a

∅ 3.5 mm minijack.

• Even if [AV/Headphones] was set to [J Headphones] in a playback mode, the function of the AV

OUT/

X terminal will return automatically to AV output when you turn off the camcorder.

Operating modes:

*

COP

Y

Advertising