Color bars/audio reference signal 83, Cop y, Color bars/audio reference signal – Canon XA10 User Manual
Page 83
Color Bars/Audio Reference Signal
83
Color Bars/Audio Reference Signal
You can have the camcorder output and record color bars and a 1 kHz audio reference signal.
1 Open the [Color Bars & Test Tone] screen.
[FUNC.]
[MENU]
8
[Color Bars & Test Tone]
2 Touch the desired option* and then touch [a].
* When you select [
Color Bars & Tone], you can adjust the audio reference signal. Touch [f] and
continue with the procedure below.
Options
(
Default value)
To adjust the audio reference signal
1 Back in the 8 menu, touch [Audio Reference Signal].
2 Touch [
-12 dB], [
-18 dB] or [
-20 dB] and then touch [a].
Operating modes:
[
B Off]
Select this option if you do not intend to use the color bars or audio reference signal.
[
Color Bars]
Displays a standard SMPTE color bar pattern.
[
Color Bars & Tone]
In addition to the color bar pattern, an audio reference signal is output.
COP
Y