P.106), Cop y – Canon Wireless Transmitter WFT-E6A User Manual

Page 106

Advertising
background image

106

Responding to Error Messages

This error occurs if, for some reason, the transmitter fails to receive confirmation
from the FTP server that image file transfer is complete.

X

Turn off and on the FTP server and camera and transfer the images again.

Is the transmitter too far from the GPS device?

X

Bring the GPS device closer to the transmitter.

Are any obstacles blocking the line of sight between the transmitter and the GPS
device?

X

Move the GPS device to a position visible from the point of view of the transmitter.

The transmitter and GPS device were disconnected, for some reason, and the
connection cannot be restored.

X

The connection is more likely to be lost if there are nearby wireless LAN terminals,
cordless telephones, microphones, microwave ovens, or similar devices operating on the
same 2.4 GHz band used for Bluetooth communication. Also note that the connection is
more likely to be lost in poor weather or high humidity.

Is the GPS device on?

X

Turn the GPS device on.

Is the GPS device ready for the Bluetooth connection?

X

Turn the GPS device on and set it up for connection via Bluetooth.

Is the transmitter too far from the GPS device?

X

Bring the GPS device closer to the transmitter.

Is the GPS device on?

X

Turn the GPS device on.

Is the same password set on the transmitter and GPS device?

X

The setting is case-sensitive, so check upper- and lower-case characters. Make sure the
correct password is entered on the GPS device and transmitter.

The GPS device does not support SPP (Serial Port Profile).

X

Confirm that the GPS device supports SPP.

47: Image file transfer completion not confirmed by FTP server

51: Connection to Bluetooth device lost

52: Bluetooth device cannot be found

53: Incorrect Bluetooth password

54: No compatible Bluetooth service available on connected device

COP

Y

Advertising