Basic linked shooting, Cop y – Canon Wireless Transmitter WFT-E6A User Manual

Page 67

Advertising
background image

67

Shoot with the master camera linked to slave cameras as follows.

1

Set up the master camera.

Configure the settings on the master camera
following steps 1-3 on the preceding page, and
then select [Master].

2

Select [Auto connect].

For [Manual connect] instructions, refer to page
71.

3

Switch to setting up the slave cameras.

On the slave cameras, select [OK].

4

Check the number of slave cameras.

X

On the master camera LCD monitor, the number of
slave cameras detected is displayed.

5

Establish the connection.

On the master camera and all slave cameras,
select [OK].

X

A screen confirming the connection of the camera
is displayed.

Settings information is stored on the cameras. It is
not stored on the transmitters.

Basic Linked Shooting

COP

Y

Advertising