Canon Wireless Transmitter WFT-E6A - Manual (Page 94)

94
1 On the [53] tab, select [Communication
settings].
2 Select [Bluetooth device connection].
Once you have set [Communication func] to
[Enable], you can select [Bluetooth device
connection].
X Press <0> when the next screen shown below is
displayed.
3 Select the GPS device.
Nearby Bluetooth® devices in use are listed.
Turn the <5> dial to select the GPS device, and
then press <0>.
Select [OK] and press <0>.
If a Bluetooth® password has been set on the
GPS device, a password input screen is displayed.
Enter the password.
X The transmitter now starts to establish a
connection with the GPS device.
It may take a few minutes to establish a
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.
Connecting GPS Devices via Bluetooth
COP
Y