Responding to error messages, Cop y – Canon Wireless Transmitter WFT-E6A User Manual

Page 98

Advertising
background image

98

If transmitter errors are displayed on the camera LCD monitor, refer to the examples of
corrective actions in this section to eliminate the cause of the error. In case of errors, the
<Y> lamp on the camera starts blinking. The error details can also be checked on the [53]
tab [Communication settings]  [Network settings]  [Error description].

Click the error number in the following chart to jump to the corresponding page.

If [Waiting to retry transfer…] is displayed

If image transfer via FTP fails after shooting, the
screen on the left is displayed, and the camera’s
<Y> lamp blinks in red. Check the error number
and eliminate the cause of the error.
Once the cause of the error is eliminated, the images
whose transfer previously failed will be transferred
automatically.

Note that if you cancel image transfer or turn off the camera, auto retry is not performed. Follow
the steps on page 36 to transfer the images.

Responding to Error Messages

11 (p.99)

12 (p.99)

21 (p.99)

22 (p.100)

23 (p.100)

24 (p.101)

25 (p.102)

26 (p.102)
41 (p.103)

42 (p.104)

43 (p.104)

44 (p.104)

45 (p.105)

46 (p.105)

47 (p.106)

51 (p.106)

52 (p.106)

53 (p.106)

54 (p.106)

61 (p.107)

62 (p.107)

63 (p.108)

64 (p.108)

65 (p.108)

66 (p.109)

67 (p.109)

68 (p.109)

69 (p.109)

71 (p.110)

72 (p.110)

73 (p.110)

82 (p.110)
91 (p.110)

COP

Y

Advertising