If you need to use pulse dialing – Canon Color imageCLASS MF9220Cdn User Manual
Page 31
29
1 Settings Necessary to Use the Machines Functions
5
Make sure the following screen is displayed on the display.
By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the
following procedure.
If you use pulse dialing, follow the procedure below after you finish the “Setup Guide,” and change the
telephone line type setting on the machine to pulse dialing.
If you do not know the type of telephone line you use, contact your local telephone company.
1
Press
(Main Menu).
2
Press the right Any key to select <Additional Func.>.
3
Use [▼], [▲] or (Scroll Wheel) to select <Communications Settings>, then press [
OK
].
4
Use [▼], [▲] or (Scroll Wheel) to select <Fax Settings>, then press [
OK
].
5
Use [▼], [▲] or (Scroll Wheel) to select <User Settings>, then press [
OK
].
6
Use [▼], [▲] or (Scroll Wheel) to select <Tel. Line Type Selection>, then press [
OK
].
7
Use [▼], [▲] or (Scroll Wheel) to select <Manual>, then press [
OK
].
8
Use [▼], [▲] or (Scroll Wheel) to select telephone line type, then press [
OK
].
<Tone>: Tone dialing (Default)
<Pulse>: Pulse dialing
9
Press
(Main Menu) to return to the Main Menu screen.
–
–
If You Need to Use Pulse Dialing