Canon Wireless File Transmitter WFT-E2 II A - Manual (Page 36)

36
After shooting, you can select multiple images as desired and transfer them all at once. You
can also transfer unsent images or images that could not be sent previously.
If both a CF card and SD card are used at the same time, or if external media is connected,
images are transferred from the source specified on the menu [5] tab, in [Record
func+media/folder sel.]  [Record/play].
You can also continue shooting even while images are being transferred.
1 In [WFT settings], select [Image sel./
transfer].
2 Select [Sel.Image].
X An image is displayed.
3 Select images to transfer.
Press <0>. Turn the <5> dial to display <X> in
the upper left corner of the image to transfer.
Press <0> to confirm your selection.
You can select up to 9,999 images.
Press the <y> button to display three images per
screen. Press the <u> button to display one
image per screen again.
After selecting images to transfer, press the
<7> button.
Batch Transfer
Selecting Images to Transfer
COP
Y