Canon XA25 - Manual (Page 129)

Remote Operation Via the Wi-Fi Remote Application
129
Adjusting the gain
1 Press the gain button.
• The available gain values will appear.
2 Select the desired gain value.
• The selected value will be displayed on the Wi-Fi Remote screen and
will be applied to the camcorder.
Adjusting the shutter speed
1 Press the shutter speed button.
• The available shutter speed values will appear.
2 Select the desired shutter speed value.
• The selected value will be displayed on the Wi-Fi Remote screen and
will be applied to the camcorder.
Adjusting the focus
1 Touch MF.
2 Press one of the focus controls to adjust the focus
as necessary.
• Press one of the controls on the [NEAR] side to focus
closer or one of the controls on the [FAR] side to focus
farther away.
• There are three levels of adjustment - [ ]/[ ] is the smallest and [ ]/[ ] the largest.
Adjusting the zoom
Press one of the zoom controls to adjust the zoom
position as necessary.
• Press one of the controls on the [WIDE] side to zoom out
or one of the controls on the [TELE] side to zoom in.
• There are three levels of adjustment - [ ]/[ ] is the
slowest and [ ]/[ ] is the fastest.
NOTES
• Depending on the network setup and conditions, there may be a delay when using live view and
configuring settings.
• When color bars are being displayed, live view updates will stop.
• When Wi-Fi remote is activated, q > [Time Zone/DST], [Date/Time] and [GPS Auto Time
Setting] are not available. If [GPS Auto Time Setting] had previously been set to [Auto Update], it will
automatically be set to [Disable] and cannot be changed. It will return to its previous setting when
you deactivate Wi-Fi Remote.
• Only one device may be connected to the camcorder at a time.
COP
Y