Inserting and removing a memory, Card 38, Initializing a memory card 38 – Canon XA25 User Manual

Page 38: Cop y

Advertising
background image

Using a Memory Card

38

Inserting and Removing a Memory Card

Make sure to initialize (A 38) all memory cards before using them with this camcorder.

1 Turn off the camcorder.

• Make sure the

POWER/CHG

indicator is off.

2 Open the double memory card slot cover.

3 Insert the memory card straight, with the label facing

the front of the camcorder, all the way into one of the
memory card slots until it clicks.

• You can also use two memory cards, one in each memory

card slot.

4 Close the double memory card slot cover.

• Do not force the cover closed if the memory card is not

correctly inserted.

To remove the memory card

Push the memory card once to release it. When the memory card springs out, pull it all the way out.

IMPORTANT

• Observe the following precautions while the ACCESS indicator is flashing. Failure to do so may

result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the memory card.

• Turn off the camcorder before inserting or removing a memory card. Inserting or removing the

memory card with the camcorder on may result in permanent data loss.

• Memory cards have front and back sides that are not interchangeable. Inserting a memory card

facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the memory
card as described in step 3.

Initializing a Memory Card

Initialize memory cards when you use them with this camcorder for the first time. You can also initialize
a memory card to permanently delete all the recordings it contains.

1 Power the camcorder using the compact power adapter.

• Do not disconnect the power source or turn off the camcorder until the initialization is completed.

Operating modes:

COP

Y

Advertising
This manual is related to the following products: