Canon XA25 - Manual (Page 62)

Zooming
62
To set the zoom speed of the wireless controller
For the wireless controller, first set the overall zoom speed to one of three levels. The wireless
controller operates at a constant speed that you can select. Refer to the following table for a summary
of the zoom speed.
1 Open the [Zoom Speed Level] screen.
[FUNC.] > [MENU] > p > [Zoom Speed Level]
2 Touch [Z Fast], [[ Normal] or [] Slow] and then touch [K].
• When [Zoom Speed Level] is set to [Z Fast], the sound made by the camcorder's internal
machinery will increase and may be recorded in the scene.
3 Touch [Wireless Ctrlr Zoom Speed].
4 Touch [ð] or [ñ] or drag your finger along the bar to select the desired constant speed.
5 Touch [X].
Approximate zoom speeds* (wireless controller)
* Measured from full wide-angle to full telephoto.
** When the zoom speed is too fast (approximately 1.9 seconds end-to-end), the camcorder will have
more trouble focusing automatically while zooming.
Using the Touch Screen’s Zoom Controls
1 Display the zoom controls on the touch screen.
[FUNC.] > [ZOOM]
• The zoom controls appear on the left side of the screen.
2 Touch the zoom controls to operate the zoom.
• Touch anywhere within the T area to zoom out or
anywhere within the S area to zoom in. Touch closer to the
center for a slow zoom; touch closer to the V/U icons for
faster zooms.
3 Touch [X] to hide the zoom controls.
[Wireless Ctrlr
Zoom Speed]
setting
[Zoom Speed Level] setting
[ ] Slow] [ [ Normal] [ Z Fast]
1 (slowest) 4 min. 45 sec. 3 min. 1 min.
16 (fastest) 4 sec. 2.5 sec. 1.9 sec.**
COP
Y