Copying an id card – Canon imageCLASS D1350 User Manual

Page 63

Advertising
background image

3-9

Cop

ying

Copy a 2-sided card onto one side of paper.

Keys to be used for this operation

OK

Start

COPY

1

Place a card on the platen glass, and then close

the feeder.

Place the card with spacing of 1/4” (5 mm) from the left edge of the
platen glass.
Align the center of the card with the arrow mark, as shown below.

To place the card

horizontally

A4

B4

A5

A5

B4

A4

To place the card vertically

A4

B4

A5

A5

B4

A4

2

Press [

].

3

Select <N on 1> using [ ] or [ ] and press [OK].

Copy: Press Start
100% LTR
Copy Ratio: 100% Di

...

Paper: LTR:Plain

N on 1: Off

1

1

1

4

Select <ID Card Copy> using [ ] or [ ] and press

[OK].

N on 1
Off
2 on 1
4 on 1

ID Card Copy

5

Press [

] (Start).

Proceed to the next step when the scan is complete.

6

Turn sides.

Place the card with spacing of 1/4” (5 mm) from the left edge of the
platen glass.
Align the center of the card with the arrow mark, as shown below.

To place the card

horizontally

A4

B4

A5

A5

B4

A4

To place the card

vertically

A4

B4

A5

A5

B4

A4

7

Press [

] (Start).

NOTE

To place your document (card) on the platen glass

Place the card on the left half of the platen glass.

Copy ratio

The copy ratio is automatically set to <100%>.

Supported paper sizes

Sizes larger than A4/Letter

.

Copying an ID Card

Advertising
This manual is related to the following products: