Canon PowerShot D20 - Manual (Page 110)

Shooting Range and Focusing
110
Specify the general focal position.
Referring to the on-screen MF indicator bar
(which shows the distance and focal position)
and the magnified display area, press the
op
buttons to specify the general focal position,
then press the
m button.
Fine-tune the focus.
Press the shutter button halfway to have the
camera fine-tune the focal position (Safety
MF).
MF Indicator
• AF frame mode or size cannot be changed while focusing manually
(p. 112). If you want to change the AF frame mode or size, cancel
manual focus mode first.
• Focusing is possible when using the digital zoom (p. 62) or digital
tele-converter (p. 111), or when using a TV as a display (p. 171), but
the magnified display will not appear.
• To focus more accurately, try attaching the camera to a tripod to stabilize it.
• To hide the magnified display area, press the n button and set [MF-Point
Zoom] on the 4 tab to [Off] (p. 42).
• To deactivate automatic focus fine-tuning when the shutter button is pressed
halfway, press the
n button and set [Safety MF] on the 4 tab to [Off]
(p. 42).
COP
Y