Canon PowerShot D20 - Manual (Page 119)

Flash
119
Access the setting screen.
Press the n button, choose [IS Settings] on
the 4 tab (p. 42).
Configure the setting.
Choose [IS Mode], and then choose the
desired option (p. 42).
*The setting is changed to [Continuous] for movie recording.
Powered IS reduces slow camera shake that may occur when recording
telephoto movies. However, this option may not produce the expected results
when used for the stronger camera shake that may occur when shooting
while walking or when moving the camera to match subject movement. In this
case, set Powered IS to [Off].
Follow the steps in “Changing the IS Mode
Settings” (p. 119) to access the [IS Settings]
screen.
Choose [Powered IS], and then choose [Off]
(p. 42).
Changing the IS Mode Settings
Still Images Movies
Continuous
Optimal image stabilization for the
shooting conditions is automatically
applied (Intelligent IS) (p. 60).
Shoot Only*
Image stabilization is active only at the
moment of shooting.
Off Deactivates image stabilization.
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this case,
set [IS Mode] to [Off].
Deactivating Powered IS
Movies
• [Powered IS] settings are not applied when [IS Mode] is set to [Off].
COP
Y