Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 550)

Output Settings Panel
• Enlarged/Reduced Printing
Select the method for enlarged/reduced printing.
The following settings are available for enlarged/reduced printing.
Setting Details
Fit Paper Size Enlarges/reduces the whole page automatically to fit the media size selected for out-
put. Select the media size to print from Paper Size.
Fit Roll Paper Width Enlarges/reduces the whole page automatically to fit the width of the roll paper with
the page width.
*Make sure that the width of the roll paper in the printer is set correctly for Roll Pa-
per Width in the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Scaling Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling
value in numerical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either ▲ button or ▼ button.
*Although Scaling can be set to make the image larger than the media size, the part
that does not fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
• Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specific media
type is used.
Mac OS X Software > Color imageRUNNER Enlargement Copy >
Output Settings Panel iPF750
4
534