Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 649)

7.
Press ▲ or ▼ to select Manual, and then press the OK button.
Test pattern A is printed for manual adjustment.
Note
• When printing on sheets, follow the instructions on the Display Screen and remove the sheet.
8.
Examine test pattern A for adjustment. Determine the pattern in which banding is least noticeable.
Note
• If banding seems least noticeable in two patterns but you cannot decide which one is better, choose
an intermediate value.
For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.
9.
Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.
Test pattern B is printed for adjustment.
Note
• If you printed test pattern A on a sheet, follow the instructions on the Display Screen and use anoth-
er sheet of the same type of paper.
Additionally, after test pattern B is printed, follow the instructions on the Display Screen and re-
move the sheet.
10.
Examine test pattern B for adjustment. Determine the pattern in which banding is least noticeable.
11.
Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.
Fine-Tuning the Paper Feed Amount (Adj. Fine Feed)
If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try execut-
ing Adj. Fine Feed during printing to fine-tune the feed amount.
Note
• Always execute Adj. Quality before Adj. Fine Feed.
Once you execute Adj. Quality, the Adj. Fine Feed value will revert to 0.
(See "Automatic Banding Adjustment (Adj. Quality).")
→P.630
(See "Manual Banding Adjustment (Adj. Quality).") →P.631
Adjustments for Better Print Quality > Adjusting the feed amount >
iPF750 Fine-Tuning the Paper Feed Amount (Adj. Fine Feed)
6
633