Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 720)

5.
In the Available Port list, select Standard TCP/IP Port.
6.
Click New Port.
After the wizard starts, a window is displayed for the Welcome to the Add Standard TCP/IP Printer Port Wiz-
ard.
7.
Click Next.
8.
In Printer Name or IP Address, enter the printer's IP address. If the DNS is configured, you can also enter the
DNS Domain Name.
9.
Follow the instructions on the screen to add a printer port.
10.
Click Close to close the Printer Ports dialog box.
11.
Make sure the printer port you added is displayed under Ports, and that the port is selected.
12.
Click Close to close the printer properties window.
Configuring the Printer Driver Destination (Mac OS X)
Specify the printer driver destination as follows if the printer's IP address is changed, or if you will use the printer over a
network connection instead of via USB connection.
• If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the Destina-
tion in TCP/IP Networks." →P.719
• If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network." →P.721
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Follow the steps below to configure the TCP/IP network settings.
When using an IPv4 IP address
1.
Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
Network Setting > Initial Settings >
Configuring the Printer Driver Destination (Mac OS X) iPF750
9
704