Replotting with hp-gl/2 jobs is not possible – Canon imagePROGRAF iPF750 MFP M40 User Manual
Page 817
Replotting with HP-GL/2 jobs is not possible.
Cause
Corrective Action
The data was lost be-
cause of replotting.
Data for replotting is lost after the following operations. In this case, send the print job again.
•
The memory buffer was cleared from the Control Panel.
•
The printer was turned off.
•
The printer has received a new HP-GL/2 print job.
•
Printing has been canceled
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause
Corrective Action
The printer is analyzing the print job.
Please wait a while until printing is finished.
A job was printed when Input Resolution in the
Control Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi and
print again.
(See "Menu Settings.")
Troubleshooting
>
HP-GL/2 problems
>
iPF750
Replotting with HP-GL/2 jobs is not possible.
11
801