No printhead, Execute printhead cleaning, No printhead execute printhead cleaning – Canon imagePROGRAF iPF750 MFP M40 User Manual
Page 843
No printhead
Cause
Corrective Action
No Printhead is installed.
Install the Printhead.
(See "Replacing the Printhead.")
Execute printhead cleaning.
Cause
Corrective Action
The Printhead
nozzles are clog-
ged.
Follow these steps to clean the Printhead.
1.
Stop printing by pressing ▲ or ▼ to select Stop Printing.
2.
Clean the Printhead.
(See "Cleaning the Printhead.")
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1.
Press the OK button on the Control Panel to stop printing.
2.
Clean the Printhead.
(See "Cleaning the Printhead.")
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
Error Message
>
Messages regarding printheads
>
iPF750
No printhead
12
827