Using the rc-v100 remote controller, Using the rc-v100 remote controller 114, Cop y – Canon XF305 User Manual
Page 114
Recording
114
3
Using Optional Accessories
NOTES
• The camcorder is not compatible with the receiver's digital compass
and positioning interval functions. Also, the [Set now] option is not
available for the [J Other Functions]
[GPS Auto Time] setting.
• The GPS receiver's time will be set once when the receiver is attached
to the camcorder. The time will not be adjusted while recording.
• GPS information cannot be added to photos captured from a clip.
Using the RC-V100 Remote Controller
You can attach the optional RC-V100 Remote Controller to control the
camcorder (including advanced recording functions) from a distance.
* In
mode, the remote controller can be used only to access the menus.
1 Turn off the camcorder and connect the optional RC-V100
Remote Controller to the camcorder.
• For details, refer to the instruction manual of the RC-V100.
2 Turn on the camcorder and open the [REMOTE Term.] submenu.
[J Other Functions]
[REMOTE Term.]
3 Select [RC-V100] and then press SET.
Options
Operating modes:
*
[J Other Functions]
[REMOTE Term.]
[Standard]
[RC-V100]:
Select this option to use the optional RC-V100 Remote
Controller.
[Standard]:
Select this option to use other remote controllers, including
optional zoom remote controllers and commercially available
remote controls.
COP
Y