Canon XF305 - Manual (Page 185)

185
Additional Information 8
Displaying the Status Screens
Displaying the Status Screens You can use the status screens to check the camcorder’s various recording- and playback-related settings. You
can also output the status screens on an external monitor.
1 Press the STATUS button.
• The status screen most recently displayed will appear unless you
turned off the camcorder or changed the operating mode. In such
case, the [Camera] status screen appears in
mode and the
[Buttons / Remote] status screen appears in mode.
2 Push the joystick up/down or use the SELECT dial to scroll through
the status screens.
3 When you are finished, press the STATUS button again to exit the
status screens.
• Alternatively, you can press the MENU or CUSTOM PICT. button. Doing
so will exit the status screen and open the respective menu.
* Does not appear in the [Photos] index screen.
** This screen appears only when an optional GP-E2 GPS Receiver is attached to the camcorder.
Operating modes:
Status screen Description 0
[Camera] Displays settings related to recording, such as gain, focus and zoom. N – 186
[Buttons / Remote] Allows you to verify the current function of each assignable button
and whether the wireless controller is on.
N N 186
[Audio]* Displays settings related to audio. N N 187
[Media] Displays information about the recording media. N N 187
[Video] Displays the settings for the video terminals and which special
recording mode is in effect.
N N 188
[User Memo] Displays the user memo that will be recorded with clips. N – 188
[Battery / Hour Meter] Allows you to check the remaining battery time, battery life and how
long the camcorder has been in operation.
N N 189
[ X Data 1/3]
Displays the settings for the custom picture file that will be
embedded into clips.
N –
189
[ X Data 2/3] 190
[ X Data 3/3] 190
[GPS Information Display]** Displays GPS information. N – 191
COP
Y