Change the line type – Canon imageCLASS D1350 User Manual
Page 17
17
4.
Change the line type.
By default, the telephone line type is set to tone dialing. Skip the following steps in the procedure below when you
choose to use tone dialing.
Follow the steps in the procedure below to select pulse dialing.
Contact your local telephone company when you are not sure of the line type that you are using.
Press [
] (Menu).
Press [
] or [
] to select <Fax Settings> and press [OK].
Press [
] or [
] to select <Basic Settings> and press [OK].
Press [
] or [
] to select <Select Line Type> and press [OK].
Press [
] or [
] to select the line type that you are using and press [OK].
<Pulse>: Pulse dialing
<Tone>: Tone dialing (Default)
Press [
] (Menu) to close the menu screen.
Preface
1
Installing the Machine
2
Configuring and Connecting the Fax
3
Connecting to a Computer and
Installing the Drivers
4
Appendix