Canon EOS C300 PL - Manual (Page 49)

49
Operating the Camcorder Remotely
Operating the Camcorder Remotely
There are two methods in which the camcorder can be operated remotely. The first is to connect the optional
RC-V100 Remote Controller to the camcorder’s REMOTE terminal. The second is to attach the optional WFT-E6
Wireless File Transmitter to the camcorder’s WFT terminal to use the Wi-Fi Remote application.
Using the RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to control the camcorder (including the advanced
recording functions) from a distance. The remote controller lets you turn the camcorder on, navigate the menus
and remotely control the aperture (#) and shutter speed, change picture-related settings like the knee and
sharpness, and more.
Use the cable supplied with the remote controller to connect it to the camcorder. For details on how to connect
and use the remote controller, refer to its instruction manual.
1 Turn off the camcorder and connect the optional RC-V100
Remote Controller to the camcorder.
2 Turn on the camcorder and open the [REMOTE Term.] submenu.
[ w Other Functions] > [REMOTE Term.]
3 Select [RC-V100] and then press SET.
Options
NOTES
• The camcorder’s ND filter cannot be changed using the ND button on the remote controller.
• The following controls on the remote controller will not operate the camcorder: AGC button, AUTO KNEE
button, AWB button, ZOOM dial and AF button.
• #The AUTO IRIS button on the remote controller will operate the camcorder only when a compatible EF
lens (A 187) is attached to the camcorder.
• Adjusting picture-related settings with the remote controller can be performed only after a custom picture file is
selected (A 114).
Operating modes:
[RC-V100]: Select this option to use the optional RC-V100 Remote Controller.
[Standard]: Select this option to use commercially available remote controls.
Connection cable
(supplied with the RC-V100)
[w Other Functions]
[REMOTE Term.]
[Standard]
COP
Y