White balance, Setting the white balance, White balance 74 – Canon EOS C300 PL User Manual

Page 74: Setting the white balance 74, Cop y

Advertising
background image

White Balance

74

White Balance

The camcorder uses an electronic white balance process to calibrate the picture and ensure accurate colors
under different lighting conditions. There are 3 methods of setting the white balance.

Custom white balance: You can use a white object to establish the white balance and set it to one of two custom
white balance positions, ÅA or ÅB.

Set color temperature: Allows you to set the color temperature between 2,000 K and 15,000 K.

Preset white balance: Set the white balance to ¼ (daylight) or

(incandescent lamp). Preset white balance

settings can be further fine-tuned within a range of -9 to 9.

When recording under fluorescent lights, we recommend setting the custom white balance.

NOTES

• The [Color Matrix] and [White Balance] custom picture settings (A 121) take precedence over the white

balance settings.

• You can use the [w Other Functions] > [Custom Function] > [Shockless WB] setting (A 123) to make the

transition look smoother when you change the white balance settings.

• When an optional RC-V100 Remote Controller is connected to the camcorder, you can adjust the white

balance with the remote controller’s A/B, PRESET and Å buttons.

Setting the White Balance

1 Set the white balance mode using the direct setting mode.

• Press the FUNC. button to highlight the white balance icon and select

the desired white balance mode.

• To apply the setting as it is, press SET. To establish the custom white

balance, fine-tune the preset white balance settings or change the
color temperature, continue the procedure as described below before
pressing SET.

• For details refer to

Using the Direct Setting Mode

(A 61).

If you selected one of the custom white balance settings ÅA or ÅB:
If a custom white balance has not yet been stored, the custom white
balance icon ÅA or ÅB and default value (5,500 K) will flash slowly.
To establish the custom white balance:

2 Point the camcorder at a white object so that it fills the whole screen.

• Use the same lighting conditions you plan to use when recording.

3 Press the Å button.

• The Å A or Å B icon will flash quickly.

• Make sure the white object fills the screen until the procedure is completed.

• After the icon stops flashing, the procedure is completed and the camcorder will exit the direct setting

mode. The setting is retained even if you turn off the camcorder.

If you selected one of the preset white balance settings, ¼ or

:

You can fine-tune the preset values within a range of -9 to 9.

2 Press the Å button.

Operating modes:

COP

Y

Advertising
This manual is related to the following products: