Canon FAXPHONE L100 - Manual (Page 60)

60
Settings
Options
Bold: Default settings
Details
<Remote RX>
Off
On
- Remote RX ID: 00 to 25 to 99
Specify whether or not to remotely instruct the machine to
switch to fax mode when an external telephone is connected.
To send the instruction to the machine, you must dial the
remote RX ID from the external telephone. You can also specify
an remote RX ID.
2
5
<Auto RX Switch>
Off
On
- Incoming Ring Time: 1 to 15
to 99 (seconds)
Specify how long an incoming call should ring before the
machine automatically switches to fax mode. This option is
available when the receive mode is set to <Manual>.
Changing Communication Management Settings
1
Press [ ] (Menu).
2
Press [
▲
] or [
▼
] to highlight <System Management Settings>, and then press [OK].
3
Press [
▲
] or [
▼
] to highlight <Communication Management Settings>, and then press [OK].
4
Press [
▲
] or [
▼
] to highlight the desired item, and then press [OK].
•
If you select <Fax Settings>, you can select a sub-item.
•
See “Communication Management Settings.”
Communication Mgt. Set
Fax Settings
Memory Lock Settings
5
Specify the setting values, and then press [OK].
6
Press [ ] (Menu) to close the screen.