Cop y, Troubleshooting – Canon SELPHY CP800 Black User Manual

Page 68

Advertising
background image

Power

Printing Problems

31

Troubleshooting

If you think there is a problem with SELPHY, first check the following. If the items below do not solve your

problem, contact a Canon Customer Support Help Desk as listed on the included customer support list.

Power will not turn on

Make sure the plug is correctly connected

(p. 10)

.

Hold the q button pressed until the start-up image appears on the screen

(p. 11)

.

When using a battery (sold separately), use a fully charged battery

(p. 29)

.



Cannot print

Make sure SELPHY is turned on

(p. 11)

.

Make sure that the ink and paper cassettes are correctly inserted

(p. 10)

.

When the ink is spent, replace the ink cassette with a new one. When the paper is spent, refill the paper

cassette with new paper

(p. 14)

.

Make sure you are using the correct combination of paper, paper cassette and ink cassette

(p. 8)

.

Connect SELPHY to only one device at a time. If SELPHY is connected simultaneously to a digital

camera, computer and has a memory card inserted, you may not be able to print properly.
Make sure there is no slack in the ink sheet

(p. 8)

.

Make sure that you are using dedicated paper

(p. 9)

.

Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is

not a malfunction. Wait until the temperature drops and printing resumes. If SELPHY is connected to

a computer, a message will appear on the computer screen. Do not cancel the print. Wait until printing

resumes.

Cannot display/print images from memory card or USB flash memory

Make sure the memory card is inserted all the way into the correct slot with the label facing upward

(pp. 12, 13)

.

Make sure the USB flash memory is inserted all the way, in the correct direction

(p. 14)

.

Make sure you are using a supported image type

(p. 12)

.

Make sure that any memory card requiring an adapter is inserted into the adapter before being inserted

into the slot

(p. 12)

.

Printing from digital cameras

Make sure your digital camera supports PictBridge

(p. 27)

.

Make sure SELPHY and the digital camera are connected correctly

(p. 27)

.

Make sure the battery/batteries in your digital camera are not depleted. If there is insufficient charge,

replace the battery with a fully charged one, or new batteries.

Printing from computers

Make sure you installed the software according to the correct procedure

(p. 23)

.

Make sure SELPHY is connected directly to a port on the computer with the USB cable

(p. 24)

.

Problems Exclusive to Windows: Make sure the printer is not set to offline.

If it is, right-click the printer icon and cancel the offline setting.
Problems Exclusive to Macintosh: Make sure SELPHY is registered on the Printer List

(p. 24)

.

Cannot print the date

Printing from memory cards or USB flash memory

Make sure the date imprint option is set

(p. 28)

.

If you are using DPOF printing, the date imprint settings are configured on the digital camera used for the

DPOF settings.












COP

Y

Advertising