Canon imagePROGRAF iPF510 - Manual (Page 131)

Handling rolls
Loading the Roll in the Printer
Follow these steps to load rolls in the printer.
Note
• Remove any loaded paper that will not be used.
• Rolls: (→P.119)
• Sheets: (→P.167)
• If the Platen is dirty, clean inside the Top Cover. (→P.627)
• If the Output Tray Extension is extended, push it in.
1.
Insert your ngers under the Vertical Paper Guides on the Output Tray at the positions shown
(a) and lift the guides.
2. Open the Roll Feed Unit Cover with one hand, as shown.
Handling Paper 117