Roll feed unit, Attaching the spacer for borderless printing, Removing the spacer for borderless printing – Canon imagePROGRAF iPF510 User Manual

Page 154

Advertising
background image

Handling rolls

Attaching the Spacer for Borderless Printing

If you use an A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll
Holder.
Insert the protrusions (b) of the Spacer for Borderless Printing (a) into the holes (c) of the Roll Holder, as
shown.

Removing the Spacer for Borderless Printing

Pull out the Spacer for Borderless Printing from the Roll Holder, as shown.

Roll Feed Unit

A unit for using rolls. (Optional)

Roll Feed Unit RU-01

For instructions on installing the Roll Feed Unit, see “Installing the Roll Feed Unit”. (→P.143)

140 Handling Paper

Advertising