Removing the roll feed unit – Canon imagePROGRAF iPF510 User Manual
Page 156
Advertising
Handling rolls
Removing the Roll Feed Unit
Important
•
Always make sure the printer is off before removing the Roll Feed Unit.
1.
Remove any rolls in the Roll Feed Unit. (→P.120)
2.
Use a coin to loosen the screws on both sides of the back of the Roll Feed Unit (a) and remove
the unit from the printer.
3.
Hold the Roll Feed Unit by the Carrying Handles (a) as you remove the Roll Feed Unit from
the printer.
142 Handling Paper
Advertising