Loading sheets manually, Loading paper in the top paper feed slot, If the standard paper tray unit is installed – Canon imagePROGRAF iPF510 User Manual
Page 169
Handling sheets
Loading Sheets Manually
When using the tray, load the paper in the Top Paper Feed Slot (→P.155). However, if you have specied
POP Board, insert the sheet in the Front Paper Feed Slot (→P.163).
Loading paper in the Top Paper Feed Slot
The procedure varies depending on use of the following accessories.
•
If the standard Paper Tray Unit is installed (→P.155)
•
If the optional Roll Feed Unit is installed (→P.159)
Note
•
You can load only one sheet in the Top Paper Feed Slot. Do not load more than one sheet at a time.
This may cause paper jams.
•
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
•
Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
•
Load the paper straight. Loading paper askew will cause an error.
•
Before feeding paper or printing, make sure the sheet is at against the Paper Tray Cover. The sheet
may jam if it curls before feeding or printing and the trailing edge drops toward the front.
•
If a roll is loaded, rewind the roll before this procedure. (→P.141)
If the standard Paper Tray Unit is installed
1.
If you send a print job specifying a paper other than POP Board from a computer beforehand,
the type and size of paper are shown on the Display Screen.
Note
•
If you will load paper before sending a print job, press the Feeder Selection button to illuminate the
Paper Tray lamp. A screen is shown on the Display Screen for selection of the paper type. Press
◄ or ► to select the type of paper, and then press the OK button. Next, a menu for selection of
the paper size is shown on the Display Screen. Press ◄ or ► to select the size of paper, and
then press the OK button.
•
For details on paper types, see the Paper Reference Guide. (→P.103) By factory default, Plain
Paper is selected.
•
Be sure to select the correct paper type. If this setting does not match the type of paper loaded, it
may cause feed errors and affect the printing quality.
2.
Open the Paper Tray Cover.
Handling Paper 155